VDO Cyclecomputing HC12.6 Instruction Manual - page 21
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
GB
HC
12.6
3
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
Function
TRIP DIST
RIDE TIME
AVG SPEED
MAX SPEED
MODE 1
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
Function
NAVI GATOR
CLOCK
ODO METER1
ODO METER2
ODO TOTAL
MODE 2
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
Function
STOP WATCH
AVG PULSE
MAX PULSE
TIME ABOVE
TIME IN
TIME BELOW
PULSE
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF
1.4 Twist-Click mounting of computer on to holder
The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.
The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the
computerhead from the handlebar holder. Twist it to the left, remove computerhead from handlebar holder.
P4
2. Basic information on how to operate your VDO HC 12.6
Make sure you are familiar with the computers basic operating instructions before the initial set-up and use.
Your VDO HC 12.6 features 3 keys / buttons
Left ...... Center
Right
MODE1.....PULSE....MODE2
The display
The following information is permanentely displayed:
• current / actual speed in KMH or MPH accurate to +/- 0.5 KMH / MPH
• symbol (MPH or KMH) for the conversion selected,
• wheelsize selected: Bike 1 (WS1) or Bike 2 (WS2)
• symbols to compare actual speed and average speed (up-arrow, down-arrow, dot)
• heart-symbol, that indicates pulse signals are being transmitted
• LO Pulse, preset lower limit of your training target zone
• HI Pulse, preset upper limit of your training target zone
• Note-symbol to indicate acoustic alarm ON/OFF