Vega VEGAKON 66 Operating Instructions Manual - page 8
8
3 Product description
VEGAKON 66 • - Relay (DPDT)
32649-EN-151021
VEGAKON 66 is a compact instrument, i.e. it can be operated without
external evaluation system. The integrated electronics evaluates the
level signal and outputs a switching signal. With this switching signal,
a connected device can be operated directly (e.g. a warning system,
a pump etc.).
Thedataforpowersupplyarespecifiedinchapter"Technical data".
3.3 Operation
The VEGAKON 66 is a compact level switch with integrated electron-
ics module.
Ontheelectronicsmoduleyouwillfindthefollowingdisplayand
adjustment elements:
•
Control lamp for indication of the switching status
•
Mode changeover for selection of the output signal
•
DIL switch for adjustment of the damping
•
Rotary switch for adjustment of the conductivity value
3.4 Storage and transport
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable carton material. The sensing element is additional-
ly protected with a cardboard cover. For special versions, PE foam or
PE foil is also used. Please dispose of the packaging material through
specialised recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 … 85 %
Voltage supply
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature