Velleman DK-9350 User Manual - page 24
Most of the keypads mainly controls “Going In” with user codes and controls “Going Out” simply
pressing an egress bu on. However, in some situa ons, providing some warning and delay are
desirable before the door is open a er pressing the egress bu on. For example, in hospitals or
schools, it may be desirable to delay the egress opera on and provide a warning to prevent pa ents
or young children from easily leaving the protected area.
● An egress bu on programmed with egress delay & warning does not affect the normal opera on
of the keypad. The user codes are always the first priority to operate output 1 to actuate the door
lock.
● It is not necessary to do anything if egress delay is not required. Just leave the egress bu on on its
default se ng.
Loca ons Egress Modes Confirm
0 to 4
The Five Egress Modes:
--
Momentary Contact with no warning and delay
(Default)
Press the egress bu on momentarily, Output 1 ac vates instantly to open the door.
--
Momentary Contact with 5 seconds delay and warning beep
Press the egress bu on momentarily, the keypad will beep for 5 seconds before Output 1
ac vates.
--
Momentary Contact with 10 seconds delay and warning beep
Press the egress bu on momentary, the keypad will beep for 10 seconds before Output 1
ac vates.
--
Hold contact for 5 seconds with warning beep
Press and hold the egress bu on for 5 seconds and the keypad will beep for those 5 seconds
before Output 1 ac vates.
--
Hold contact for 10 seconds with warning beep
Press and hold the egress bu on for 10 seconds and the keypad will beep for those 10
seconds before Output 1 ac vates.
Programming & Operation Examples :
1. Set keypad to programming mode with master code and
key. Taking the previous
programmed master code
3 2 8 9 as example here:
2. Program the egress bu on with 5 seconds delay momentarily mode:
Operation --- Press the egress bu on momentary, the keypad will beep for 5 seconds before the
door is open to warn that someone is preparing to exit the protected area.
3. Program the egress bu on with 5 seconds delay hold contact mode:
Operation --- Press and hold the egress bu on for 5 seconds. The keypad will beep for those 5
seconds before the door is Open to warn that someone is preparing to exit the
protected area .
4. Program the egress bu on to return to default se ng:
Operation --- Press the egress bu on momentarily, the door is open instantly without warning.
5. Exit programming mode by pressing the
Egress Delay & Warning (Location 85)
24