Velleman WS1080 User Manual - page 5
WS1080_v7
VELLEMAN
5
•
Outdoor Temperature
o
Touch the outdoor temperature section once and press + or – to switch
between outdoor temperature, wind chill and dew point display.
o
Touch the outdoor temperature section a second time and press + or – to
switch between the temperature display in °C or °F.
o
Touch the outdoor temperature section a third time and press + or – to set
the high temperature alarm (HI AL), or press ON/OFF to switch the alarm
on or off.
o
Touch the outdoor temperature section a fourth time and press + or – to set
the low temperature alarm (LO AL), or press ON/OFF to switch the alarm
on or off.
o
Touch the outdoor temperature section a fifth time to display the maximum
temperature reading. Hold the value pressed to reset the value.
o
Touch the outdoor temperature section a sixth time to display the minimum
temperature reading. Hold the value pressed to reset the value.
•
Indoor/Outdoor Humidity
o
Touch the indoor/outdoor humidity section once and press + or – to set the
high humidity alarm (HI AL), or press ON/OFF to switch the alarm on or off.
o
Touch the indoor/outdoor humidity section a second time and press + or –
to set the low humidity alarm (LO AL), or press ON/OFF to switch the alarm
on or off.
o
Touch the indoor/outdoor humidity section a third time to display the
maximum indoor/outdoor humidity reading. Hold the value pressed to reset
the value.
o
Touch the indoor/outdoor humidity section a fourth time to display the
minimum indoor/outdoor humidity reading. Hold the value pressed to reset
the value.
•
Wind Speed
o
Touch the wind speed section once and press + or – to switch between
average wind speed and gust speed (GUST).
o
Touch the wind speed section a second time and press + or – to switch
between the wind speed display in km/h, mph, m/s, knots or Bft.
o
Touch the wind speed section a third time and press + or – to set the high
wind speed alarm (HI AL), or press ON/OFF to switch the alarm on or off.
o
Touch the wind speed section a fourth time and press + or – to set the wind
direction alarm, or press ON/OFF to switch the alarm on or off.
o
Touch the wind speed section a fifth time to display the maximum wind
speed reading. Hold the value pressed to reset the value.
•
Rain
o
Touch the rain section once and press + or – to switch between 1h, 24h,
week, month and total rainfall display.
o
Touch the rain section a second time and press + or – to switch between
the rainfall display in mm or inches.
o
Touch the rain section a third time and press + or – to set the high rainfall
alarm (HI AL), or press ON/OFF to switch the alarm on or off.
o
Touch the rain section a fourth time to display the maximum rainfall reading.
Hold the value pressed to reset the value.
o
Touch the rain section a fifth time and press CLEAR to reset all rainfall
values.