Velleman WS1080 User Manual - page 6
WS1080_v7
VELLEMAN
6
•
Weather Forecast
o
Touch the weather forecast section once and press + or – to switch
between sunny, partly cloudy, cloudy and rainy display.
o
Touch the weather forecast section a second time and press + or – to set
the pressure threshold from 2 ~ 4 hPa.
o
Touch the weather forecast section a third time and press + or – to set the
storm threshold from 3 ~ 9 hPa.
•
Pressure
o
Touch the pressure section once and press + or – to switch between
absolute pressure and relative pressure display.
o
Touch the pressure section a second time and press + or – to switch
between pressure display in hPa, inHg or mmHg.
o
Touch the pressure section a third time and press + or – to set the relative
pressure value.
o
Touch the pressure section a fourth time and press + or – to set the high
pressure alarm (HI AL), or press ON/OFF to switch the alarm on or off.
o
Touch the pressure section a fifth time and press + or – to set the low
pressure alarm (LO AL), or press ON/OFF to switch the alarm on or off.
o
Touch the pressure section a sixth time to display the maximum pressure reading. Hold the value pressed to reset the
value.
o
Touch the pressure section a seventh time to display the minimum pressure reading. Hold the value pressed to reset
the value.
NOTE: When the absolute pressure is selected, step 3 will be skipped.
•
Pressure Bar Graph
o
Touch the pressure bar graph once and press + or – to switch between the 12h and 24h pressure history.
•
Time
o
Touch the time section once and press + or – to adjust the contrast level (from 0 ~ 8, default 5).
o
Touch the time section a second time and press + or – to select the time zone.
o
Touch the time section a third time and press + or – to select the 12h or 24h time display.
o
Touch the time section a fourth time and press + or – to set the hour.
o
Touch the time section a fifth time and press + or – to set the minutes.
•
Date
o
Touch the date section once and press + or – to switch between alarm time, date and week.
o
Touch the date section a second time and press + or – to switch between
date display in DD-MM and MM-DD format.
o
Touch the date section a third time and press + or – to set the year.
o
Touch the date section a fourth time and press + or – to set the month.
o
Touch the date section a fifth time and press + or – to set the day.
o
Touch the date section a sixth time and press + or – to set the alarm hour.
o
Touch the date section a seventh time and press + or – to set the alarm minutes, or press ON/OFF to switch the
alarm on or off.
•
Memory
o
Touch the memory section once and press + or – to switch between the weather history data. This data can be edited
through the included PC software.
o
Touch the memory section a second time. Hold the memory section pressed to clear the contents.