Veloteq CF 6000 User Manual - Maintenance
-12-
Maintenance
How to transport the DM 6000
Lift the NF-6000 to 45° so that the transportation wheels point downwards and to the
front, and
use the fixed handlebar to move it.
Maintenance
How to maintain the DM 6000
Inspect and tighten all parts of the magnetic
elliptical bike trainer regularly. Replace any
worn parts immediately.
For continued smooth operation of the
magnetic elliptical bike, the Front and Rear
Stabilizers should be kept clean. Using a
soft cloth and mild detergent, clean any
dust and residue that may build up where
the Wheels move on the Stabilizers. Other
components of the magnetic elliptical bike
can a so be cleaned in this manner.
IMPORTANT: Never use abrasives or
solvents to clean the magnetic elliptical
bike. To prevent damage to the computer,
keep liquids away and keep it out of direct
sunlight.
Computer trouble- shooting
If the computer does not function properly,
the batteries should be replaced. In
addition, make sure that the connectors are
plugged into the computer (see assembly
step 6).