Veloteq Treadmill Manuals - page 15
III.
[WEIGHT]:
1.
Press SET to do adjustment.
2.
Press the Direction keys to adjust the weight.
3.
Press SET again to confirm the adjustment.
2.
SET GOAL MODE:
I.
Press SET to select the goal.
II.
Press the direction keys to switch between [TIME], [Distance], and [Calorie].
III.
Press SET key to confirm the Goal setting.
IV.
Use direction keys again to adjust the goal value.
V.
Press SET to confirm the adjustment.
3.
SELECT LEVEL:
The workout level will be divided into 16 parts, as below:
I.
The first brick at the button of the first section shows.
II.
Press the Direction keys to add the bricks to the desired level.
III.
Press SET key to confirm and START key to start the program.
IV.
Repeat for the rest section until the last section was entered. Once the last block is
completed, USER1 setting will be saved.
1.
PRESS START:
I.
Press START to start the workout.
II.
3-second count-down.
III.
Workout starts.
IV.
During the workout period, the user may adjust their Incline and Speed from the Up and
Down keys of Speed and Incline.
USER 2 Program:
The operating process of the USER 2 program is exactly the same as the USER1 program.
Maintenance
TREADMILL MAINTENANCE
Proper maintenance is very important to ensure a faultless and operational condition of
the treadmill. Improper maintenance can cause damage to the treadmill or shorten the life
of the product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts must be
replaced immediately.
14