Vent-Axia 403368 Operating Instructions Manual - page 8
7
Instructions for use, maintenance and changing the
absorbent ceramic
The absorbent ceramic can absorb 70g of water, and has the capacity to take a full load approximately
280 times per day. The ceramic also can evaporate water. During normal use, water will be evaporated
continuously and maintain the function of absorbing.
Maintenance simply requires clearing its surface. Normally, its lifetime will be the same as the machine.
Improper use or maintenance could result in breakage; see below for replacement instructions.
1. Use the key to loosen the security screw and remove the tray. (fig. 1)
2. Use the key to loosen the security screw of the base plate and remove the machine. (fig. 2)
3. Use a screwdriver to loosen the screw ( 2 pcs) on the ceramic, and replace it with a new one. (fig. 3)
4. Put the machine back and secure the security screw to the base plate.
5. Put the tray back and lock up the security screw.
Instructions for use of the drain tank
Generally, the remaining water following usage will
evaporate in the absorbent ceramic. During high
traffic times, leftover water will flow to the drain tank
automatically. The capacity of the drain tray is
240 cc. It's recommended to clean the drain tank every
3 months water will come through the “overflow
hole” if the drain tank is full. A drainpipe (not included)
can be added if necessary. The specifications of
the drainpipe is I.D. 6mm, O.D. 10mm
(fig. 1)
(fig.1)