User’s manual twinfresh comfo sa-50 twinfresh comfo sa-50-2 twinfresh comfo sa1-50 twinfresh comfo sa1-50-2 single-room reversible ventilator.
2 introduction use delivery set designation key technical parameters safety requirements design and operating logic mounting and set-up unit control connection to power mains maintenance storage and transportation rules manufacturing warranty acceptance certificate connection certificate warranty ca...
3 twinfresh comfo sА-50 technical parameters introduction this user’s manual includes technical description, operation, installation and mounting guidelines, technical data for the single-room reversible ventilator twinfresh comfo sa-50. Use the single-room ventilator twinfresh comfo sa-50 is design...
4 fig. 1. Twinfresh comfo sa-50 overall and connecting dimensions 470 (22 7/16") 203(8") 234 (9 3/16") 190 (7 1/2") 190 (7 1/2") 250 (9 13/16") 150 (5 7/8") speed i ii iii voltage 50-60 hz [v] 1~100-230 power [w] 4,01 4,80 7,30 max. Current [a] 0,025 0,031 0,048 max. Air capacity [m 3 /h] (cfm) 11 (...
5 twinfresh comfo sА-50 fig. 3. Unit design and operating logic the single-room ventilator consists of a metal telescopic duct, ventilating unit with a decorative grille and an outer box, fig. 3. The unit has a telescopic structure with adjustable length that is regulated by position of the air duct...
6 mounting and set-up the unit is designed for installation into a specially prepared hole inside a wall. The hole must be perpendicular to the wall plane, fig. 4. Fig. 4. Unit mounting fill the slots with a mounting foam outside inside 155 (6 1/8") prior to mounting prepare holes for the telescopic...
7 twinfresh comfo sА-50 fig. 6. Hole spacing for fastening of the outer boxes 150 (5 7/8") 75 (2 15/16") 6 (1/4") 4 holes 90 (3 9/16") 180 (7 1/16") hole spacing for fastening of the outer suspended box for twinfresh comfo sa-50 hole spacing for fastening of the suspended outer box for twinfresh com...
8 fig. 7. Controls on the ventilating unit speed switches ventilation mode switch unit control the unit is controlled with a remote controller, fig 8 or with the control buttons located on the ventilating unit casing, fig. 7. The control from the ventilating unit has limited possibilities. It enable...
9 twinfresh comfo sА-50 unit control with the buttons on the ventilating unit to turn the ventilator on select one three ventilation modes and activate the second or the third speed. To turn the ventilator off set the speed switch to the middle position . Use the ventilation mode switch to change th...
10 the unit is rated for connection to single-phase ac 1~100-230 v / 50-60 hz power mains. For wireworks facilitation, the unit is supplied with a pre-wired power cord and a plug. Connect the unit to power mains through the external automatic circuit breaker with magnetic trip integrated into the fi...
11 twinfresh comfo sА-50 maintenance disconnect the unit from power mains prior to any servicing operations. Maintenance of the unit means regular cleaning of the surfaces from dust and filter replacement. To clean the ventilator from dust use a soft dry brush, a cloth or compressed air. Cleaning wi...
12 ______________________________________________________________________________________________________ ______________________________________________________________________________________________________ ___________________________________________________________________________________________...
2012 v91-3en-00
