Vents TwinFresh Comfo SA-50 User Manual - page 8
8
Fig. 7. Controls on the ventilating unit
Speed switches
Ventilation mode switch
UNIT CONTROL
The unit is controlled with a remote controller, fig 8 or with the control buttons located on the ventilating unit casing, fig. 7. The
control from the ventilating unit has limited possibilities. It enables solely activating the second and the third speed and setting three of
four available ventilation modes. The remote control has better control functionality.
Positions of the speed switch:
- second speed. The ventilator runs with 50% capacity.
- turn the fan off. The unit is off. The louvre shutters are closed.
- third speed. The unit operates with maximum air capacity.
Ventilation mode switch:
- Passive ventilation mode (louvre shutters are opened, fan does not operate).
- Heat recovery mode.
- Extract mode.
Fig. 8. Remote controller
Unit on/off
Night mode
Heat recovery
Speed selection (3-2-1)
Passive ventilation
Air extract
Air supply at selected
speed
Setting humidity
threshold