Vents VUE2 200 P User manual - Vu_2 200 P
5
Due to the ability to save heating energy by means of energy recovery the unit is an important element of energy-effi
cient premises.
The unit is a component part and is not designed for independent operation.
The unit is designed to provide permanent controlled air exchange by means of mechanical ventilation in houses, offi
ces, hotels, cafés,
meeting halls and other mechanically ventilated premises as well as utilization of extract air heat energy to warm up supply purifi ed air.
The unit is designed for ceiling mounting, the VUE2 200 P model is designed for ceiling as well as for wall mounting.
The unit is rated for continuous operation.
Transported air must not contain any fl ammable or explosive mixtures, evaporation of chemicals, sticky substances, fi brous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic
germs).
PURPOSE
THE UNIT MAY NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL,
MENTAL OR SENSORY CAPACITIES, OR LACKING THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE UNIT INSTALLATION SITES MUST PREVENT ACCESS BY UNATTENDED CHILDREN.
DELIVERY SET
DESIGNATION KEY
Name
Number
Air handling unit
1 item
Mounting bracket
2 items
User's manual
1 item
Packing box
1 item
VU_2 200 P
Design features
P — suspended mounting
Unit type
VUT - ventilation with heat recovery
VUE - ventilation with energy recovery
VUTE - ventilation with heat and energy recovery
Air capacity [m
3
/h]
Number of heat exchangers [items]