Verdant VX Series Instruction Manual - page 6
CONFIGURATION
BUTTON
NOTE: You can access Thermostat
Configuration settings by pressing
the “Configuration” button. Use
10
11
Thermostat Configuration
Thermostat Configuration
Setting the thermostat clock
Set the thermostat clock to current time.
➤
Use the “Up” and “Down” buttons to set the hours;
➤
Press the “Fan” button to set the minutes;
➤
Use the “Up” an “Down” buttons to set the minutes;
➤
Press the “F/C” button to advance to the next menu;
Setting the clock correctly is crucial for proper operation of the
thermostat.
Once the thermostat is powered, thermostat configuration settings will
appear on the thermostat screen.
In order to properly operate the PTAC unit:
➤
Set the thermostat clock;
➤
Enter the room number;
➤
Configure the equipment settings;
➤
Select Energy Savings Preset;
➤
Use the “Up” and “Down” buttons to change the setting;
➤
Press the “Fan” button to advance to the next setting;
➤
Press the “F/C” button to advance to the next configuration screen;
➤
Press the “Power” button to save and exit configuration;
NOTE: If the thermostat is connected to a network, the equipment
settings configured on the thermostat will be ignored and the
thermostat settings configured through the network will be applied.