Verilux VA04 Instruction Manual - Duration Settings
Trouble Shooting Sanitizing Wand
18
Setting and Using SLEEP SET — continued
3. Use the Selector Control Dial to highlight SLEEP SET.
4. Press the Selector Control Dial to choose SLEEP
SETTINGS.
The SLEEP SETTINGS menu is displayed. DURATION: 5
MINUTES is highlighted (5 MINUTES is the default setting).
Duration Settings
1. Press the Selector Control Dial.
2. From the SLEEP DURATION sub-menu, highlight
5 MINUTES, 15 MINUTES or 30 MINUTES.
3. Press the Selector Control Dial to choose the highlighted
selection.
The display returns to the SLEEP SETTINGS menu.
Light Settings
The Sleep brightness level is only used for the Sleep Cycle. You may set the initial
brightness level for the cycle. When the Sleep Cycle begins, the light will begin at
this level then continue to dim until the duration of the Sleep Cycle ends.
The Brightness Control on the front panel controls
the initial brightness of the LED light panel and also
controls the initial brightness of an external lamp,
which can be plugged into the rear panel. Both the
LED light panel and external lamp dim in accord.
Use of the LED light panel and an external lamp are
optional. You can choose to have no light, LED light only, external lamp only or
both LED and external lamp light.
For the Sleep Cycle, only the white LEDs are lit, then dimmed. The blue LEDs
are used only in the Wake Cycle because the blue light is known to be more
stimulating.
Change the Sleep Cycle initial brightness by using the Brightness Control on
the front panel before or after you’ve made your menu settings. When the Sleep
Cycle begins – when you press the SLEEP Button – the initial brightness is the
current Brightness Control setting.
1. Use the Selector Control Dial to highlight LIGHT: TOP AND
LAMP (TOP AND LAMP is the default setting).
2. Press the Selector Control Dial.
3. From the SLEEP LIGHT sub-menu, highlight TOP ONLY,
LAMP ONLY, TOP AND LAMP or NONE.
MAIN MENU
TIME
SET
WAKE
SET
SLEEP
SET
AUDIO
SET
LIGHT SET: LAMP ONLY
DISPLAY SET: MEDIUM
EXIT
DURATION: 5 MINUTES
LIGHT: TOP AND LAMP
BACKLIGHT: ON
SOUND: NONE
PLAY MODE: CONTINUOUS
PREVIOUS
SLEEP DURATION
5 MINUTES
15
MINUTES
30
MINUTES
S
GS
DURATION: 5 MINUTES
LIGHT: TOP AND LAMP
BACKLIGHT: ON
SOUND: NONE
PLAY MODE: CONTINUOUS
PREVIOUS
SLEEP LIGHT
TOP
ONLY
LAMP
ONLY
TOP AND LAMP
NONE