Vollara safe hearth User Manual - page 3
SAFETY FEATURES
pROdUCT dIAGRAM
4
5
TIp-OVER SAFETY FEATURE
this heater is equipped with a tip-over safety feature.
Once the heater is tipped over, an internal switch will
automatically shut the heater off. Once the heater
is restored an upright position, the heater will reset.
to continue operation, turn on the heater using the
supplied remote control or the control panel on the
heater.
OVERHEAT SAFETY FEATURE
this heater is equipped with a overheat safety feature.
When the heaters internal components reach a certain
temperature that could cause overheat and possible fire,
the heater will automatically shut off.
AUTO-LOCK FEATURE
Auto-lock can prevent children from changing settings
on the heater. It can be set with the unit either power on,
to prevent changes to the temperature or fan setting, or
power off, to prevent turning the unit on. When locked,
control panel and remote control failed to function.
NOTE: It is normal for the power cord to feel warm
to the touch; however, a loose fit between the outlet
and the plug may cause overheating of the plug. If this
occurs, try inserting the plug into a different outlet.
contact a qualified electrician to inspect the original
outlet for damage.
IN THE BOX
• safehearth™ Portable heating system
• Remote control with battery installed
• Owner’s manual
CONTROL pANEL
1. 、 maximum temperature indicator: all lights are on when
set at the highest temperature
2. 、 minimum temperature indicator: bottom light is on
when set at the lowest temperature
3. 、 Remote control signal: window for receiving remote
control signal
4. 、 temperature down button: for setting temperature
lower
5. 、 temperature up button: for setting temperature higher
6. 、 high fan speed indicator: light is on when high fan speed
is selected
7. 、 Fan speed button: for selecting fan speed
8. 、 normal fan speed indicator: light is on when normal fan
speed is selected
9. 、 high heat mode indicator: light is on when high heat
mode is selected
10. 、 heat button、for selecting either Automatic heat mode
or high heat mode
11. 、 Automatic heat mode indicator: light is on when
Automatic heat mode is selected
12. 、 Power button: for power on or off
13. 、 Power supply light、light is on when the unit is
connected to electric supply
14. 、 timer button、for adjusting the length of time unit runs
and turning on the timer
15. 、 2 hours indicator: light is on when you set the timer for
2 hours
16. 、 4 hours indicator: light is on when you set the timer for
4 hours
17. 、 6 hours indicator: light is on when you set the timer for
6 hours
18. 8 hours indicator: light is on when you set the timer for 8 hours