Volvo 164 Owner's Manual - page 55
SERVICING
Replacing the bulbs for the front turn
i ndicator flashers and the parking
lights
Remove the two Philips screws which
hold the glass. The bulbs can now be re-
moved by pressing them inwards and then
turning them a little anti-clockwise. The
i nner bulb is for the parking light, the
outer for the flasher.
Replacing the bulbs for the rear turn
indicator flashers, parking lights, stop
lights and reversing lights
Remove the two Philips screws which hold
the glass. The bulbs can now be removed
by pressing them inwards and turning them
slightly anti-clockwise at the same time.
The top bulb is the flasher, the one under
that is the reversing light, the next one
under that the stop light and the one at
the bottom the rear light. Make sure that
the sealing strip fits well against the glass
when it is refitted.
Replacing the bulbs for the
license plate light
The two bulbs for the license plate light
are mounted on a holder located under
the trunk lock.
Loosen the two screws which hold the
glass and remove it. The bulb is now ac-
cessible for changing.
Replacing the bulb for the glove
l ocker
The bulb is located under the dashboard
above the glove locker door. To replace
the bulb, first press it in slightly and then
turn it anti-clockwise.
54