Volvo S60 - ANNEXE 931 Quick Manual - page 3
1. Briefly press the button
– the engine stops.
2. Pull the remote control
key out from the ignition
switch.
BLIS – BLIND SPOT INFORMATION
SYSTEM*
If the BLIS' indication lamp illuminates despite
no vehicle being in the blind spot, the cause
could be reflection from wet road surface or
low sun shining into the camera for example.
In the event of a direct fault in the system the
display shows the text
Blind spot syst. Serv-
ice required
.
The key can remain in a pocket, for example, the
whole time.
LOCK & ARM THE CAR ALARM
- Touch the rear section of one of the outer door
handles (see illustration) or press lightly on the
smaller of the boot lid's two rubberised buttons.
UNLOCK & DISARM THE ALARM
- Grip a door handle and open the door in the
usual way (a glove may prevent the function) or
press lightly on the larger of the boot lid's two
rubberised buttons.
START THE ENGINE
- Depress the brake/clutch pedal and briefly
press the START/STOP button.
SWITCH OFF THE ENGINE
- Briefly press the START/STOP button.
See the owner's manual, section "Locks and
alarm", for more information.
In order to reach the following key positions
without the engine starting: Do not depress the
brake/clutch pedal.
Position Active functions
Remote control key not inserted – Audio
system and passenger compartment
lighting.
Remote control key inserted - Instrument/
clock lighting, steering lock off.
Inserted key and short press on START
– sunroof*, power windows, fan, ECC,
windscreen wipers, 12 V socket, RTI*.
To exit key position 0/I and switch off all power
consumers: Pull the key from the ignition switch.
SWITCH OFF THE ENGINE AND REMOVE
THE REMOTE CONTROL KEY
KEY POSITIONS
KEYLESS* KEY SYSTEM