W Audio CR-6 User Manual - page 5
CR-6 PROFESSIONAL 19” RACK MIXER USER MANUAL PAGE 4/5 V-1
6.Connections ( Setup )
There are many options available for your particular needs and the diagram below is just one example for
your reference. Make sure all knobs are at “ zero “ and all devices are off. First, connect all input sources;
next, connect the stereo outputs to the power amplifiers and/or audio receivers such as tape decks. Plug your
mixer into AC power. Now you are ready to switch everything on.
Important: Always switch on your audio input sources such as turntables or CD players first, then your
mixer, and finally amplifiers. When turning off, always reverse this operation by turning off amplifiers, then
your mixer, and then input devices.
Note:Incorrect connection will result in malfunction. Make sure the connection is correct before operation.