W Audio MIC40 Handheld User Manual - page 5
Receiver features
Single channel Receiver Features:
1, AF Level indicators: Indicates audio signal strength, Green indicates
normal operation and Red indicates overload or excessive audio level.
2, Channel Display: Shows the frequency data of the selected
channel group (1-16).
3, Power button: Turns the receiver ON/OFF
4, Power ON indicator: This light illuminates when the receiver is
connected to a electrical outlet and is switched ON
5, Diversity Signal Indicators: The diversity A/B indicators illuminate when
RF (radio frequency) signals are received from the transmitter. When
channel A light is illuminated, channel A is being used and when
channel B light is illuminated, channel B is being used.
6. Down Function Button: Decreases the channel value.
7, Up Function Button: Increases the channel value.
8, Volume Control Knob: Rotate the knob to increase or decrease the
volume of the receiver output.
9. Antennas: Supply for the RF receiver.
10, Antenna Input Connectors: For use with the supplied antenna.
11, XLR Output Connection: Plug an XLR audio cable from this connector
to your audio input.
12, Squelch Control: Adjust the squelch control setting to emphasize either
signal quality or system range. This control is factory pre-set, and
normally does not need further adjustment.
2