W Audio MIC40 Handheld User Manual - page 6
Receiver features (cont)
13, ¼” Jack Audio Output Connector (Unbalanced high Z): An
unbalanced audio cable with a ¼” Jack plug (e.g. a standard guitar
cable) can be used between this connector and your audio input.
14, Power input connector: Connect the AC adaptor to this socket and
then plug into a AC electrical outlet. (Please use supplied AC adaptor).
Transmitter Functions & Features:
1, Grill: Protects the microphone cartridge and helps reduce wind noise.
2, Channel selection control: Value must match the receiver indicator
display.
3, Battery indicator: Green indicates the battery is normal, Red
indicates that the battery should be recharged or replaced.
4, Power switch: Powers the transmitter ON/OFF.
5, Battery: 2 x AA (1.5V) alkaline batteries, or NI-MH rechargeable batteries.
6, Battery cover: Rotate clockwise to close and anti-clockwise to open.
7, Channel Lock Switch: Use this switch to lock or unlock the
selected channel.
3