W Audio PSR-10A NEO User Manual - page 10
Overhead Installation
Ifthespeakersystemistobeinstalledwithamountingheightofmorethan1meter(e.g.ona
stage or framework), the speaker system must always be secured with an appropriate secondary
securing attachment.
The installation must always be secured with a secondary safety attachment. e.g. an appropriate
catch net. The secondary safety attachment must be constructed in a way that no part of the
installation can fall down if the main attachment fails.
When rigging, derigging, or servicing the speaker system standing in the area below the
installation place, on bridges or other endangered areas are forbidden.
The operator has to make sure that the safety data is approved by an expert before operation for
thefirsttimeandafteranychangesaremade.
The operator has to make sure that the safety data is approved by an expert after every four years
in the course of an acceptance test.
The operator has to make sure that the safety installation data is approved by a skilled person
once a year.
Procedure
The speaker system should be installed outside areas where persons may walk by or seated.
IMPORTANT! OVER HEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including(butnot
limited to) calculating working limits, installation materials used, and periodic safety inspection of
allinstallationmaterialsandthespeakersystem.Ifyoulackthesequalifications,donotattemptthe
installation yourself, but instead use a professional structural rigger. Improper installation can result
in bodily injury and damage to your property.
The speaker system has to be installed out of the reach of people.
CAUTION: Speaker systems in overhead installations may cause severe injuries when falling! If
you have doubts concerning the safety of a possible installation, do not install the
speaker system!
Beforeriggingmakesurethattheinstallationareacanholdaminimumpointloadof10timesthe
speaker systems weight.
10