W Audio PSR-10A NEO User Manual - page 7
7
Overview:
1, Mic volume controls
With this control you can set the
desired volume level of the microphone.
2, Volume control
With this control you can set the desired
volume of the line input.
3, Treble control
With this control you can add or decrease
the speaker high frequency. Adding high
frequency can improve the intelligibility.
4, Bass control
With this control you can add or decrease
bass to the music output. By adding bass
you can add warmth to your music.
Decreasing bass can improve the
intelligibility of the spoken word.
5, Mic inputs
Use these inputs to connect your
microphones.
6, Line input
Use this input to connect your sound
source. These inputs have to be fed with a
music signal at line level
(C/D,iPod,Laptopetc).
7, Mix output
Use this output to connect to additional
PSR A Series speakers.
8, Master volume control
With this control you can set the desired
output level of all the combined input
sources.
9, Mains socket
Connection to the mains circuit by a
standard IEC type power cable.
10, Hi limit LED
This LED illuminates when the high
frequencyamplifierisbeingoverdriven.
11, Low limit LED
This illuminates when the low frequency
amplifierisbeingoverdriven
12, Power LED
This illuminates when the power to the
speaker is switched on.