WABCO smatrboard User Manual - page 3
SmartBoard Display / Controller (EN)
3
SmartBoard functions (optional)
1
2
3
4
5
6
7
8
General information
– The menu elements are displayed in
accordance with the installed and
configured system.
– All the data is purely informational!
– The displayed information and
messages correspond to the situation
of the latest or current driving
operation.
– A detailed definition of the message
codes can be found in the
SmartBoard system description in the
INFORM product database at
www.wabco-auto.com.
Batteries may only be replaced
by an authorized speciality
workshop
(does not apply for the ADR
version)!
The SmartBoard device is not
calibrated!
Displayed values can deviate
from actual values!
Switching the SmartBoard on/off
Abb. 2
Display ON / Display
A requirement for using the SmartBoard
device is the power supply by the
ISO 7638 5-pin or 7-pin plug connection
or by a battery connected to the Trailer's
EBS E-Modulator.
The SmartBoard can be used without
the ISO 7638 plug connection.
The SmartBoard device is supplied with
power by the internal battery (not in the
ADR Version).
The standard device is not
suitable and not approved for
ADR-compatible vehicles.
Switching on the display
ISO 7638 power supply / battery
Trailer hitched:
Turn on the tractor-unit ignition.
Display is ON.
Display of the trailer's EBS functions.
Power supply by internal battery.
Trailer unhitched:
Press any button for longer than
2 seconds.
Display is ON.
Standard SmartBoard display.
Switching off the display
Turn off the tractor-unit ignition.
The background lighting goes out after
30 seconds.
The display shuts off automatically
after:
– for hitched trailer
with EBS after 45 s / with EBS E
after 75 s.
– for unhitched trailer
after 15 s
SB - 003