Wacker Neuson 0008429 series Operator's Manual - Safety Instructions

Safety instructions

Drilling and breaking hammers

SV00046GB.fm

6

2.4

Maintenance

2.4.1

Only use original spare parts. Modifications to this machine are subject

to the express approval of the Wacker Company. All liabilities shall be

refused in case of nonobservance.

2.4.2

Disconnect the drilling and breaking hammer from the electric mains

before carrying out maintenance and repair jobs.

2.4.3

Work on the electric parts of the machines may only be carried out by

skilled technicians.

2.4.4

All safety devices must be reinstalled properly immediately after

maintenance and repair jobs have been completed.

2.5

Transport

2.5.1

When being transported on vehicles, precautions have to be taken that

these hammers do not slip or turn over.

2.6

Maintenance checks

2.6.1

According to the conditions and frequency of use, drilling and breaking

hammers have to be checked for safe operation at least once every 6

months by skilled technicians, such as those found at Wacker-service

depots and have to be repaired if necessary.

Please also observe the corresponding rules and regulations valid in your

country.