Wacker Neuson DPU 7060SC Operator's Manual - Description
Description
T01042GB
13
The automatic V-belt pulley (3) combined with the centrifugal clutch
ensures optimum tension of the exciter V-belt during operation and
relief of the tension of the exciter V-belt when the machine is being
relocated or transported.
Moreover, the automatic V-belt pulley (3) automatically adapts to the
V-belt flanks in line with the wear and thus makes the entire drive from
the engine (12) to the exciter (9) maintenance-free.
The upper (7) and lower (8) masses are connected to each other by 4
vibration-damping shock mounts (11). This damping system prevents
the very high frequencies from being transmitted to the upper mass. As
a result the functionability of the drive engine is retained in spite of the
high compaction performance.
The drive engine works on the diesel principle; it is started electrically
by a pinion starter (5), draws in the combustion air through an air filter,
dry (2) and is air-colled.
The machine is equipped with a fully electronic anti-restart delay
module that prevents any malfunction with consequential damages.
Always start and stop the machine from the remote control panel. To
facilitate the starting procedure (at very low temperatures) the drive
engine has an automatic decompression mechanism.