Wacker Neuson DPU 7060SC Operator's Manual - Maintenance
of
42
Maintenance
T01051GB
26
7.2
Motoröl
Check oil level:
∗
Check oil level on oil dipstick (15).
∗
Fill up with oil through the filler neck (16) if the oil level is too low (see
Technical Data).
Engine shuts down automatically with low oil level!
∗
Changing the oil:
1. Let engine warm up.
2. Undo drain screw (24) and drain off oil.
3. Insert drain screw.
4. Pour in 2,1 l of oil through the filler nozzle (16)..
Take notice: Please pay attention to the corresponding environmental
rules and regulations when disposing of used engine oil. We
recommend you carry the oil in a closed container to a central
collecting point for used oils. Do not pour used engine oil into the
garbage nor into the sewer system, drains or even on the ground.
15
16
24