Wacker Neuson DPU 7060SC Operator's Manual - Operation
of
42
Operation
T01044GB
23
6.5
Turning off engine
Sender:
1.
Let go of both joysticks (g).
2.
Switch off the sender by moving the rocker switch (h) from the ”I”
position to the ”0” position – green LED (m) extinguishes. LEDs (n
+ o) illuminate brieflyf
Machine Console:
1.
Press ”0” button (e) for at least one second.
2.
LED ring (b) extinguishes. Vibratory plate is no longer ready to
receive signals.
Note: If a worker forgets to turn off the machine at the end of the day, the
machine will switch itself off after 58 minutes..
6.6
Compaction without extension plates
If the vibration plates is used without extension plates, screw set of
protective screws (8 pes) into the threaded boreholes situated in the
lower mass, in order to avoid threads from being damaged.
g
o
g
m
n
h
b
e