Wacker Neuson EH 6 Operator's Manual - page 40
Other manuals for EH 6:
Operator's Manual
Manual is about: Electric hammer
of
62
8 Operation
EH 6, EHB 7
40
8.2.5
Adjustable depth gauge (only EHB 7)
Adjusting the depth gauge
1. Press clamping piece.
2. Adjust depth gauge as needed by pulling out or pushing in.
3. Release clamping piece.
NOTICE
Slipping of the adjustable depth gauge can result in incorrect borehole depths.
f Always insert adjustable depth gauge into clamp with the grooved side
pointing up.
Item
Designation
1
Adjustable depth gauge
2
Clamping piece