Wacker Neuson EH 6 Operator's Manual - page 49
EH 6, EHB 7
10 Maintenance
49
10.2
Maintenance work
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following
benefits:
Protection of the machine of contamination on the construction site.
A level and clean work surface makes work easier.
There is a better overview over small parts and they are not lost as easily.
Visual inspection for damage
Check all machine parts for damage.
Cleaning the machine
1. Clean the ventilation slots with a suitable tool.
2. Wipe the housing with a damp and clean cloth.
WARNING
Electrical voltage.
Injuries from electrocution.
f Remove the plug from the plug receptacle before all work on the machine.
WARNING
A damaged machine part or power cable can result in personal injury caused by
electric current.
f Do not operate a damaged machine!
f Have a damaged machine repaired immediately!