Waeco PerfectPower PP1002 Installation And Operating Manual

Other manuals for PerfectPower PP1002: Installation And Operating Manual
Manual is about: Inverter with mains priority circuit

Summary of PerfectPower PP1002

  • Page 1

    Perfectpower pp1002, pp1004, pp2002, pp2004 grid ac in put 230v ac outp ut pow olp ovp uvp ac in put circ uit brea ker grid ac in put 230v ac outp ut pow olp ovp uvp ac in put circ uit brea ker de 6 wechselrichter mit netz-vorrangschaltung montage- und bedienungsanleitung en 25 inverter with mains p...

  • Page 2

    D fordern sie weitere informationen zur umfangreichen produktpalette aus dem hause dometic waeco an. Bestellen sie einfach unsere kataloge kostenlos und unver- bindlich unter der internetadresse: www.Dometic-waeco.De gb we will be happy to provide you with further information about dometic waeco pro...

  • Page 3

    Perfectpower 3 grid ac input circuit breaker ac input 230v ac output power olp ovp uvp 3 2 1 4 5 6 7 8 1 dc input neg– pos+ reverse polarity will damage unit a b on remo. Off 1 2 3 4 6 7 5 2 a b 3 _pp1000_pp2000.Book seite 3 freitag, 18. November 2011 2:53 14.

  • Page 4: Pp1000

    Perfectpower 4 fg j3 n + fg fg j3 n + fg 1 2 2 pp1000 pp2000 3 4 5 3 4 5 4 status po w er level loa d lev el input on off 1. 2. 5 _pp1000_pp2000.Book seite 4 freitag, 18. November 2011 2:53 14.

  • Page 5

    Perfectpower 5 input 230 v ac output 230 v ac l1 perfectpower dc input dc 230 v ac fi 2 fi 1 pe n l1 pe n l1 pe n l1 pe n 6 5 4 1 3 7 2 6 _pp1000_pp2000.Book seite 5 freitag, 18. November 2011 2:53 14.

  • Page 6: Table of Contents

    En perfectpower 25 please read this instruction manual carefully before starting the appliance and keep it in a safe place for future reference. If you pass on the device to another person, hand over this operating manual along with it. Table of contents 1 notes on using the manual . . . . . . . . ....

  • Page 7: Notes On Using The Manual

    En notes on using the manual perfectpower 26 1 notes on using the manual a caution! Safety instruction: failure to observe this instruction can cause material damage and impair the function of the device. E warning! Safety instruction relating to a danger from an electrical current or voltage. Failu...

  • Page 8: 2.1

    En perfectpower general safety instructions 27 2.1 general safety a use the device only as intended. Maintenance and repair work may only be carried out by qualified personnel who are familiar with the risks involved and the relevant regulations. Persons whose physical sensory or mental capacities p...

  • Page 9: Scope of Delivery

    En scope of delivery perfectpower 28 3 scope of delivery 4 accessories available as accessories (not included in the scope of delivery): if you have questions in respect of the accessories, please contact your local service partner. 5 target group for this manual the chapter “connecting the inverter...

  • Page 10: Intended Use

    En perfectpower intended use 29 6 intended use e caution never use the inverter on vehicles where the positive terminal of the battery is connected to the chassis. Inverters pp1002, pp1004, pp2002 and pp2004 are used for supplying power to 230 v consumers with a 12 v or 24 v power supply: 12 v: pp10...

  • Page 11

    En technical description perfectpower 30 if the mains supply fails, the inverter switches on after 2 seconds. E caution when switching over, any devices connected should be switched off. Because they do not receive voltage for 2 s, they may have to be switched back on. The inverter is equipped with ...

  • Page 12: 7.1

    En perfectpower technical description 31 7.1 control elements front view (fig. 1, page 3): rear view (fig. 2, page 3): no. Description 1 grid: this led lights up if the inverter is supplied with external 230 v mains power; the priority circuit is active. 2 connection for the external 230 v power sup...

  • Page 13: 8.1

    En fastening and connecting the inverter perfectpower 32 8 fastening and connecting the inverter 8.1 fastening the inverter you can fasten the inverter using the holders supplied. Note the following safety instructions during installation: a ensure the device is standing firmly. Set up the device se...

  • Page 14: 8.2

    En perfectpower fastening and connecting the inverter 33 fasten the inverter as follows (fig. 5, page 4): a caution before drilling any holes, make sure that no electrical cables or other parts of the vehicle can be damaged by drilling, sawing and filing. ➤ clip two holders on the left bar and two o...

  • Page 15

    En fastening and connecting the inverter perfectpower 34 e warning – danger of electrocution! If you wish to connect more than one consumer to the inverter and install a socket distributor loop, you must arrange a circuit breaker (residual current circuit breaker) and set a grounding bridge in the i...

  • Page 16: 8.3

    En perfectpower fastening and connecting the inverter 35 connecting the inverter to the 230 v mains supply ➤ plug the 230 v connection cable into the connector for the 230 v power supply to the inverter (fig. 1 2, page 3). ➤ connect the 230 v connection cable to a 230 v socket in the vehicle. Connec...

  • Page 17

    En fastening and connecting the inverter perfectpower 36 sample circuit diagram legend: ➤ install a residual current circuit breaker in the socket distribution circuit. Setting grounding bridge (fig. 4, page 4) e warning – danger of electrocution! The grounding bridge may only be connected by a trai...

  • Page 18: Using The Inverter

    En perfectpower using the inverter 37 9 using the inverter e caution if no circuit breaker is present: if the inverter is connected to the external mains voltage, the 230 v output socket is earthed. If there is no external mains voltage, the inverter is only connected to the battery (dc operation). ...

  • Page 19: 9.1

    En cleaning and caring for the inverter perfectpower 38 9.1 using the inverter without remote control ➤ set the main switch (fig. 2 1, page 3) to – “on” to switch the inverter on – “off” to switch the inverter off ✓ led “power” lights up when the inverter is switched on. 9.2 using the inverter with ...

  • Page 20: Rectifying Faults

    En perfectpower rectifying faults 39 11 rectifying faults i note the output voltage can only be measured correctly with a true- rms measuring device. Fault cause remedy no output voltage no contact to the battery check contact and cable. Switch on the ignition if necessary. Overheating switch off th...

  • Page 21: Guarantee

    En guarantee perfectpower 40 12 guarantee the statutory warranty period applies. If the product is defective, please contact the manufacturer's branch in your country (see the back of the instruction manual for the addresses) or your retailer. For repair and guarantee processing, please include the ...

  • Page 22: Technical Data

    En perfectpower technical data 41 14 technical data i note the constant output in the technical data may be reduced for ambient temperatures of more than 40 °c (e.G. In engine or heating compartments or direct sunlight). The following technical data applies to all inverters: waeco perfectpower pp100...

  • Page 23

    En technical data perfectpower 42 variations, technical improvements and delivery options reserved. Waeco perfectpower pp1002 pp1004 item no.: pp1002 pp1004 constant output power: 1000 w peak output power: 2000 w dc fuse: 30 a x 4 15 a x 4 dimensions w x l x h: 176 x 338 x 95 mm weight: 3.5 kg waeco...

  • Page 24: Www.Dometic-Waeco.Com

    Europe a dometic austria gmbh neudorferstrasse 108 2353 guntramsdorf +43 2236 908070 +43 2236 90807060 mail: info@waeco.At h dometic switzerland ag riedackerstrasse 7a ch-8153 rümlang (zürich) +41 44 8187171 +41 44 8187191 mail: info@dometic-waeco.Ch l dometic denmark a/s nordensvej 15, taulov dk-70...