WAGNER AC20 Operating Instructions Manual - page 37
Details:
- Start of recording as a time
- File siz
with "YES" and, on Android, press the cog icon and then the recycle bin
icon.
To play back a recording, press the “ ” icon.
about the camera:
= SSID
The factory-set name of the camera
The camera's firmware version
Version of the Web user interface
"None" - detection of motion does not trigger an automatic
recording, "Motion Detection" - detection of motion will trigger
automatic recording.
"None" - detection of motion does not trigger an a recording
based on a pre-set schedule, "Recording..." - detection of motion will
trigger a recording based on a pre-set schedule.
Percentage of free memory on the micro-SD card
"No Action" - no synchronisation with the NTP Server, "Succeed" -
synchronisation with the NTP Server is activated (see "Time zone")
To ensure synchronisation with the actual time in your location and the
date, keep "Sync with NTP Server" set to ON (synchronisation activated).
Selecting the NTP Server: Keep the factory setting
Set the time zone of your location (e.g.: Germany: GMT+01:00.)
To adjust the time according to the changing clocks, select "+ 1 hour"
for Daylight Saving Time and "None" for the standard time during the
winter.
Don't for get to save your changes with "Save" when you are done.
Here you can change the camera password to access the camera.
!
#
#
#
#
#
#
#
#
#
#
#
#
·
Device ID
Alias:
Firmware Version:
Web UI Version:
Alarm:
Record:
Storage:
NTP:
12.2.2 Date and time [45 - Time Zone Settings]
Sync with NTP Server:
NTP Server:
Time Zone:
Daylight Saving Time:
Note:
12.2.3 Camera password [46 - Password]
Factory setting: ON
"time.nist.gov".
Factory setting: GMT+01:00
Factory setting: None
e
To stop the playback prematurely, press "Back" (iOS) or the "Return"
button (Android).
N.B.:
Here you will find information
!
12.2 Settings [40 - Settings]
Any changes made in the settings must be saved by pressing "Save".
12.2.1 System information [44 - View System Information and Status]
- Length of recording
-Triggered by motion (motion detection) or by a
schedule (Event:Schedule)
To delete a recording, on iOS, press the recycle bin icon [x] and confirm
!
Under "Password", delete the current camera password (factory setting:
123456) and, on iOS, also confirm with "Done".
Enter the new camera password and confirm with "Save".
Note down the camera password and keep it in a safe place. If you lose the
password, perf
can pre-set up to four email addresses to which an email with up to ten
images is to be sent following motion detection. We recommend that you set up
a dedicated Google Mail account to send these emails to (e.g.
SamSample@gmail.com).
Complete or select
following fields marked with * in order to be able to
send emails.
To check whether you have entered all details correctly, press the "Test"
field. If all details are correct, all entered recipients will receive a test email.
Save all details with "Save".
Here you can specify whether an email is to be sent
following motion detection ("ON") or not ("OFF"). If "ON" is selected, the
setting "Number of pictures attached" will also appear. This is where you
can specify how many images you would like to be attached to the email
(this may be 1 to 10 images).
Enter your email address from which you want the
emails to be sent here, and confirm with "Done" (e.g.
SamSample@gmail.com).
Enter up to four email addresses to which an
email is to be sent following motion detection, and confirm with "Done".
Enter your provider's server data for outgoing emails (for
Google Mail: smtp.gmail.com) and confirm with "Done".
Select the appropriate port of your provider (for Google Mail:
587) and confirm with "Done".
Select the appropriate transport layer
security of your provider (for Google Mail: STARTTLS) and confirm with
"Done".
Keep "ON"
Re-enter your email address from which you
want the emails to be sent here, and confirm with "Done".
!
!
!
!
!
#
#
#
#
#
#
#
#
all
Send Alarm Mail:
Sender’s Email :
Receiver1/2/3/4 Email :
SMTP Server :
SMTP Port :
Transport Layer Security Protocol*:
Need Authentication :
Sender’s SMTP Account :
Factory setting: OFF
Factory setting: ON
*
*
*
*
*
*
orm a reset (Chapter 14).
Once the camera password has been changed, no mobile device will have
complete access to the camera any longer, and after launching the app, it is no
longer possible to access the camera. To regain full access, you must delete the
current camera password under "Edit" in the menu of the corresponding mobile
device (see Chapter 11.5), enter the new password and confirm with "Save".
Keep the
.
Here you can find all settings for your chosen WLAN connection to the router. In
general, it is
to change these settings.
You
Note:
12.2.4 IP settings [47 - IP Settings]
12.2.5 WLAN settings [48 - WLAN Settings]
not necessary
12.2.6 Email following motion detection [49 - Mail Settings]
factory setting ON
GB - 37