WAGNER Control Stainer 150 Owner's Manual - Sprayer Controls
8
en
sPraYer controls
air caP ears
1
=
=
=
=
=
=
2
=
=
=
=
=
=
3
=
=
=
=
=
=
Material Flow control
i
The material flow control will be factory-set
at its lowest setting out of the box. Adjust as
needed.
•
Turn the knob out (counterclockwise) for less flow.
Generally, low material flow is needed for spraying smaller
surface areas, such as corners, lattice, or spindles.
•
Turn the knob in (clockwise) for increased flow. Generally,
high material flow is needed for spraying large surface
areas, such as fences and decks.
i
For a video showing Control Stainer 150 spraying tips and best practices, visit:
www.wagnerspraytech.com/controlstainer150
air caP / Pattern aDjUstMent
i
Adjust the spray pattern by turning the air cap
ears.
The air cap position will determine the
movement direction of the spray gun.
1.
Round pattern:
Use up and down, or side to side spraying motion,
depending upon the object being sprayed.
2.
Vertical pattern:
Use side-to-side motion during spraying.
3.
Horizontal pattern:
Use up and down motion during spraying.