WAGNER HANDI-ROLLER Manual - page 11
GB
5
Handi-Roller®
STORAGE
Turn the locking collar next to the trigger counterclockwise until the main tube slides off the plunger.
Pack a generous amount of petroleum jelly around and in between the O-rings on the plunger.
Clean and pack a generous amount of petroleum jelly on the seal (a), O-ring (b) and other indicated be-
aring areas (c) of the arm.
Unscrew the locking cap on the valve housing by turning
counterclockwise.
Remove the retaining disk and the duckbill from the valve
housing
Clean these parts thoroughly using the appropriate
cleaning solution
Replace the duckbill valve and retainer disk.
Screw the locking cap on the valve housing by turning it
counterclockwise.
* Denotes parts that can only be purchased together and not individually.
PROBLEM
CAUSE
SOLUTION
A. There is paint leakage on the
1. The seal on the arm is backward
1. Turn the seal around
roller arm assembly
2. The seal and cap were not properly
2. Clean and properly lubricate
cleaned
3. The O-ring and the connecting area were 3. Clean and properly lubricate
not cleaned properly.
4. Paint residue on connecting areas
4. Clean connecting areas
5. The O-rings are damaged or missing
5. Replace the O-rings
6. The roller cover is worn or damaged
6. Replace roller cover
7. The core or cap is worn or damaged
7. Replace core or cap
8. The bearing areas are worn
8. Call customer service
B. Plunger is difficult to pull/push
1. O-rings are not lubricated
1. Lubricate the O-rings on the
plunger
C. The fill tube will not fill with paint 1. Paint residue on fill valve components
1. Insert fill tube firmly into fill
or paint leaks from fill valve
valve and twist fill tube
several times to break up
paint residue.
2. If the problem persists, refer
to the steps below to clean
the fill valve components.
Locking cap
Retaining disk
Duckbill valve
Valve housing
Connecting
area
Parts List (Fig. 19)
Item
Description
Part No.
Qty.
1,3
gs
Roller core and cap*
0514118
1
2
Roller cover
0998230
1
4,5,6
Seal, roller arm and O-ring*
0514150
1
4,6
Seal and O-ring
0514112
1
7
O-ring
9871022
2
8
Main tube
------------
1
9
Plunger
------------
1
10
Locking cap
0284398
1
11
Retainer disk
0284395
1
12
Duckbill valve
0284435
1
13,14
Suction system*
0284293
1