Walchem WebAlert Instruction manual - 3.0 Programming
Page 3
3.0 Programming
This section describes how to set up the controller to communicate using the GPRS cell
modem.
When purchasing the unlimited data usage GPRS account, ask for the following information.
The chart below shows the required information for a few typical cell service providers:
Provider User
Name Password Access
Number
Mobile
Number
Access Point Name (APN)
T-Mobile
Not Required
Not Required *99***1#
Ask for it internet2.voicestream.com
Cingular isp@cingulargp
rs.com
cingular1
*99***1#
Ask for it isp.cingular
Vodafone
(UK)
web
web
*99***1#
Ask for it internet
KPN
(Netherlands)
Not Required
Not Required *99#
Not Used internet
Power up the unit, and connect to it using USB or Ethernet as described in the controller’s
instruction manual.
Communications Page
In order to ShoulderTap, the following fields need to be completed.
Controller ISP User name
Type the required user name into the text box. If the cell service provider does not require a
user name, then type the word “test”. The connection will fail if the text box is left blank.
Controller ISP Password
Type the required password into the text box. If the cell service provider does not require a
password, then type the word “test”. The connection will fail if the text box is left blank.
ISP Primary/Secondary Phone Number
Type the required access number into the text boxes.
Controller Phone Number
Type the mobile number into the text box. Use the pull-down to select the country code. If the
cell service provider does not actually assign a mobile number, use the controller’s serial
number to serve as the unique identifier for the ShoulderTap process.
In order to send email reports and alarms, fill in email addresses to receive the emails and
also complete the following fields. Whereas the cell service plan includes Internet access, it
does not include an email account.
SMTP IP Address
Type the email server’s IP address into the text box. Because the controller is not connected
to the Internet using the email provider as the ISP, this email server must be an Authenticated
server.