Waldorf RN8510GE Installation and operation manual - page 16

14 

Installation

Commissioning 

1. 

Before leaving the new installation; 

a.  Check the following functions in accordance with the operating instructions specified in the 

'Operation' section of this manual. 

 Light the Griddle. 

 Light the Open Burners. 

(F - Flame Failure Option). 

 Light the Open Burners. 

(PF - Pilot and Flame Failure Option). 

 Check the Low Fire Burner Operation. 

 Check the High Fire Burner Operation. 

 Check the Oven Heating. 

 Check the Oven Thermostat Operation. 

 Check the Oven Fan Operation. 

(GEC Models only). 

b.  Ensure that the operator has been instructed in the areas of correct lighting, operation, and 

shutdown procedure for the appliance. 

2. 

This manual must be kept by owner for future reference, and a record of 

Date of Purchase,

Date 

of Installation 

and 

Serial Number of Appliance 

recorded and kept with this manual.  

(These 

details can be found on Rating Plate attached to front right hand corner of bottom sill.  

Refer to ‘Gas Connection’ section).

NOTE:  If it is not possible to get appliance to operate correctly, shut off gas supply and contact 

supplier of this appliance.