Walimex PBS-400 Instruction Manual - Warning
11
6.2 Mount/demount reflector
Switch off device.
See Switch the device on and off.
Let the device cool down.
WARNING! Danger of burning on reflector and lamp. Let the
device cool down approx. 30 minutes.
Push the lateral release lever backwards and keep pressed.
Put the reflector in the three openings, so that the opening for the
reflector umbrella (optional) points downwards.
Turn the reflector clockwise until it snaps into place.
Release the release lever.
Demount reflector:
WARNING! Danger of burning on reflector and lamp. Let the device
cool down approx. 30 minutes.
Push the release lever backwards and keep pressed.
Turn the reflector anti-clockwise and take off from device.
6.3 Screw in and out of lamp
WARNING
Danger of cutting and splitting through breaking or bursting lamp
Don´t let the lamp fall down.
Don´t touch the lamps with bare hands. Just touch the lamp at the plastic
socket or wear clean cotton gloves or use a clean cloth.
ADVICE:
Possible discolouration through burn marks on the lamps.
1. Switch off device.
See Switch device on and off.
2. Disconnect from power supply:
Plug out power cord, disconnect connection cord powerpack/studio
flash.