Walker Bay 275H Assembly Instructions Manual - page 4
DO NOT FORCE TUBE INTO TRACK.
Use care when feeding tube runner
into track.
8
(
'
TUBE INSTALLATION INSTRUCTIONS
If alone, try sliding tube on with boat upside down.
Partially inflate tube (1/4 full) and apply liquid soap and water to track runner on
tube to help feed tube into track with greater ease.
Begin by sliding one side of tube halfway down hull, next slide other side on (as
shown in Illustration).
NOTE:
Before you begin the installation process, make sure your boat hull is completely
stabilized. The boat should not be able to move freely in any direction.
Before installing tube note tube’s serial number located in this
*
position on the
tube. You will need it to complete your Warranty Registration Card.
If possible, have one person feed tube into track, while other person pulls tube.
*