Walkera WK-0405 Manual - page 10
Manual is about: For RC helicopters
of
12
9
Fixing screw
Short ball linkage
Fig. 10
Main Rotor Blade Adjustment
1. Main rotor blade inspection. (1) Inspect whether the fixing screw of the main
rotor blades are too tight or loose. Extreme tightness or loosing of the blades
will result in instable flight. (2) Inspect the blade tracking problem. Blade tracking
will lead to instable flight.
2. Main rotor blade adjustment. (1) Keep the fixing screw of the main rotor blades
not too tight or too loose. (2) Lengthen or shorten the short ball linkage if the
blade tracking is existed (Fig. 10).