Walkera WK-0405 Manual - page 8
7
Flybar Set Assembly
1. Let the location notch of flybar block aim at the flybar, and press the flybar block
till the flybar reaches the end of notch; Insert one end of the flybar through hole
1 (Fig. 6-1);
2. Let the location notch of flybar block aim at the inner location mast of flybar block
sleeve, and press the flybar block along the inner location mast into the sleeve
(Fig. 6-2);
3. Counterclockwise rotate 90*the flybar block sleeve (Fig. 6-2), let the hole 1
of flybar block sleeve aim at the hook of flybar, and then push the flybar block set
outside and make the hook completely insert into the hole 2 (Fig. 6-3).
Note: the flybar set will be thrown off at high speed in flying when it is mounted
improperly. A serious damage to people or property may be taken place.
Fig. 6-1
Fig. 6-2
Fig. 6-3
9 0 *
Flybar block
Location notch
Flybar block sleeve
*
*
Flybar
Flybar block sleeve
Fig. 5
Battery Mounting and Adjustment
1. Battery pack mounting. Place the battery pack in the correct position of your helicopter (Fig. 7).