Emb manufacturing inc. 4144 boomer line · st. Clements, ontario · n0b 2m0 · canada www.Wallensteinequipment.Com keep this manual with the machine at all times do not attempt to start or operate the equipment without thoroughly reviewing this manual for safe and proper operation. Printed in canada re...
Page 2 of 12 safety alert symbol why is safety important to you? The safety alert symbol identifies important safety messages on the surge master wood splitter and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety ...
Page 3 of 12 caution : this kit is constructed of heavy gauge steel, be sure to use caution moving and installing the kit, avoid dropping or pinching body parts on corners and edges of the kit. Wallenstein pto hydraulic pump kit is required when mounting a wallenstein backhoe on a tractor which has ...
Page 4 of 12 1. Before starting, clear the area of bystanders, especially small children. 2. On the workbench, attach the 1/2” elbow con- nector to the filter head. (pre-installed on pto72) 3. Next attach the 3/4” barbed hose fitting to the tank. 4. Tighten connections as specified in the hydrau- li...
Page 5 of 12 couplers removed warning high pressure fluid hazard to prevent serious injury or death from high pressure fluid: • ensure connections are secure. • tighten to torque specification chart. • shut off the engine, wear proper hand and eye protection when searching for leaks 7. Remove the co...
Page 6 of 12 filling filler breather 12. Remove the filler breather cap and add the dexron iii atf fluid to the reservoir: • pto62: 9.4 litres (2.5 gal) • pto72: 12.3 litres (3.25 gal) filler breather cap 13. Wipe up any spillage and replace the filler breather cap..
Page 7 of 12 pump installed positioned the backhoe & tractor should always be located on a level, dry area that is free of debris and other foreign objects. When attaching the hydraulic pump to the tractor, follow this procedure: mount the pump 1. Make sure that all bystanders, especially small chil...
Page 8 of 12 backhoe mounting the backhoe should always be located on a level, dry area that is free of debris and other foreign objects. When attaching the backhoe to the machine, follow this procedure: 1. Make sure that all bystanders, especially small children are clear of the work area. 2. Make ...
Page 9 of 12 hydraulic maintenance every 100 hrs or annually drain and replace fluid: 1. Move controls to neutral or off position, stop engine, remove ignition key and wait for all moving parts to stop before servicing, repairing or main- taining. 2. Allow the machine to cool before changing the flu...
Page 10 of 12 1/4" 8 6 12 9 17 12 5/16" 13 10 25 19 36 27 3/8" 27 20 45 33 63 45 7/16" 41 30 72 53 100 75 1/2" 61 45 110 80 155 115 9/16" 95 60 155 115 220 165 5/8" 128 95 215 160 305 220 3/4" 225 165 390 290 540 400 7/8" 230 170 570 420 880 650 1" 345 225 850 630 1320 970 bolt torque* sae 2 (n.M) (...
Page 11 of 12 22 1 18 9 8 11 7 23 19 16 12 24 3 2 20 13 15 5 21 14 17 6 25 10 24 pto62 pump kit parts breakdown 4 item part no. Description qty 1 3081l107 lever, stop 1 2 3081w101 tank, 2-1/2 gallon 1 3 z51181 3/4npt x 3/4 hose barb 1 4 z51192 socket plug 1/2npt 1 5 z51221 reducer fp x mp 1208 1 6 z...
Page 12 of 12 21 1 18 9 8 11 7 25 22 19 16 12 24 3 2 20 13 15 5 23 14 17 6 10 pto72 pump kit parts breakdown 4 item part no. Description qty 1 3081l107 lever, stop 1 2 3081w151 tank, 3-1/4 gallon 1 3 z51181 3/4npt x 3/4 hose barb 1 4 z51192 socket plug 1/2npt 1 5 z51221 reducer fp x mp 1208 1 6 z513...
