WALTHER PILOT PILOT WA 800 Operating Instructions Manual - page 6
Contents
1 General
1.1
Identification of Model Version
1.2 Normal
Use
1.3 Improper
Use
2 Technical
Description
3 Safety
Warnings
3.1
Safety Warting Symbols
3.2
Generally Applicable Safety Precautions
4
Assembly / Installation
4.1
Mounting of Spray Gun
4.2
Connection of Input Lines
5 Operational
Handling
5.1 Safety
Warnings
5.2 Starting/Stopping
Requirements
5.3 Spray
Pattern
Test
5.4 Spray
Pattern
Adjustments
5.5
Retooling of Spray Gun
6 Cleaning
6.1 Safety
Warnings
6.2
Cleaning - Complete
6.3
Cleaning - Routine
7
Repairs / Replacements
7.1
Replacement of defective Needle Seal Packings
7.2
Replacement of Nozzles, Needles, Springs and Seals
8
Trouble shooting and Corrective Action
9
Disposal of Cleaning / Servicing Substances
10 Specification
Data
1 General
1.1
Identification of Model Version
Models:
Automatic Spray Gun PILOT WA 800-Serie
Types:
WA 800
(Standard with internal control)
V 20 800
WA 805
(Standard without internal control)
V 20 805
WA 810-U
(circulation with internal control)
V 20 810
WA 815-U
(circulation without internal c.)
V 20 815
WA 820-HVLP
(Low pressure with internal control)
V 20 820
WA 825-HVLP
(Low pressure without internal control)
V 20 825
WA 830-HVLP-U
(Low pres.-circulation with internal c.)
V 20 830
WA 835-HVLP-U
(Low pres.-circulation without internal c.) V 20 835
WA 840-MP
(Mediem pressure with internal control) V 20 840
WA 845-MP
(Medium pressure without internal c.)
V 20 845
WA 850-MP-U
(Medium pres.-circulation with internal c.) V 20 850
WA
855-MP-U
(Medium pres.-circulat. without internal c.) V 20 855
WA 870-K
(Adhesive version)
V 20 870
WA
871-K-U
(Aadhesive version-circulation)
V 20 871
WA 872-HVLP-K
(Low pressure-adhesive version)
V 20 872
WA 873-HVLP-K-U (Low pressure-adhesive version-circulation) V 20 873
Manufacturer:
WALTHER Spritz-und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327
Wuppertal
Tel.: 0202 / 787-0
Fax: 0202 / 787-217
www.walther-pilot.de • Email: info@walther-pilot.de
1.2 Normal
Use
The automatic spray guns PILOT WA 800, WA 810, WA 815, WA 820, WA 825, WA
830, WA 835, WA 840, WA 845, WA 850, WA 855, WA 870, WA 871, WA 872 and
WA 873 are exclusively designed for use with sprayable material types and grades.
All material conduction parts are made of stainless steel so as to permit handling
of hydrous media such as:
• paints and lacquers
• greases, oils and corrosion preventives
• adhesive compounds
• ceramic glazes and
• pickling solutions
Should the materials which you want to spray not be listed above, please contact
us for further and detailed information.
Plase note that sprayable material may only be applied to work pieces and/or simi-
lar items.
The temperature of the spraying materials shall never exceed 80 degrees Celsius.
2