WANHAO Duplicator 5S User Manual - page 4
28kg(62lbs)
39kg(86lbs)
Width 565mm
Length 605mm
Height 950mm
295*195*575mm
Height 810mm
Width 415mm
Length 455mm
Data
Print Technology
Fused filament
Fabrication(FFF)
Build Volume
Layer Resolution Ultra high 20 micron
High 60 micron
Medium 100 micron
Low 200 micron
Position precision X 12.5 micron
Y 12.5 micron
Z 5 micron
Filament diameter
3MM +-0.15mm
Nozzle diameter
0.4 mm
Print speed 30mm/s-300mm/s
Travel speed 30mm/s-350mm/s
Software
Software Package
Wanhao Maker
File Type
STL
Support
Windows(XP32 bit/7+)
Mac OS X( 10.6 64bit +)
Electrical
AC Input
100-240V
4 AMPS
50-60Hz
200Watt max
Power Requirements 24V DC@9.2AMPS
Connectivity Stand-alone printing
from SD-card
USB(firmware)
Physical dimensions
Frame Dimension
Shipping box
Net Weight
Gross Weight
T
emperature
Ambient Operating
Temperature
10°- 38°C
Storage Temperatuer 0° - 40°C
Operating Nozzle
Temperature
180°- 260°C
Sound
Average Operational
noise 48dBA.
WARNING
: The Duplicator 5 generates high temperatures and has hot moving parts that can cause injury.
Never reach inside of the Duplicator 5 while it is in operation. Always control the Duplicator 5 from the push
wheel on the front or with the power-switch on the back. Allow the Duplicator 5 to cool down for 5 minutes
before reaching inside.
CAUTION:
When opening the Duplicator 5 for service, ensure that the power supply is turned off and the
cord is disconnected from the wall socket.
CAUTION
: Only use power supply provided with your Duplicator 5 .
A2 Specification of the Duplicator 5S