Watchguard VSPV13M User Manual
2
Prerequisite
Before configuring network setup with iPhone / iPad, make
sure you have checked the followings:
(Recommended) Apply your own ADSL or cable
Internet service to simplify the network configurations.
Your camera is connected to your wireless router with
a RJ45 network cable, it’s powered on, and its LAN
status indicator( ) is always on (not blinking).
Package Content
You have checked the IP address used by your wireless
router as instructed below, and written them down.
You will need them later.
Connect your iPhone / iPad to the wireless router
with VSPV1.3M connected, and go to “Settings”
“Wi-Fi”. Select “>” near the selected wireless network
to enter the details.
Router:
The IP address of your wireless router
If no, please download from “App Store”.
Please note that EagleEyes HD for iPad doesn’t support
network configuration. Please install EagleEyes-Lite or
EagleEyes Plus on your iPad instead.
1
Assemble & Install
1. Fasten the base
of the bracket
(the round one)
to where the
camera is
installed.
2. Assemble the bracket and the camera, and adjust the
viewing angle of the camera.
3. Connect your camera to power.
The distance between your camera and the location you
want to monitor should be
3 ~ 4 meters.
You have installed our mobile program,
EagleEyes-Lite or EagleEyes-Plus, on your iPhone or
iPad.
(Optional) Your wireless router supports UPnP, and
this function is enabled.
iPhone / iPad
Network
Cable
(RJ45)
Wireless
Router
Modem
VSPV13M
LAN Port
WAN Port
VSPV13M is designed
especially for iPhone
®
, iPad
®
and Android
TM
mobile
devices, and Internet
Explorer
®
on PC. Though it’s
also accessible with other
web browsers on PC and
our free program (Video
Viewer), it is NOT
recommended to use them
with VSPV13M to avoid any
compatibility issue.
Bracket
Quick Setup
Quick Setup
with iPhone / iPad
AVN80X Network Camera
Intelligent Video
Surveillance
IP Cam
400Z
80x_V1.0
AVN80X is designed
especially for iPhone®, iPad®
and Android
TM mobile
devices, and Internet
Explorer® on PC. Though it’s
also accessible with other
web browsers on PC and
our free program (Video
Viewer), it is NOT
recommended to use them
with AVN80X to avoid any
compatibility issue.
+
+
Camera
6-pin terminal
Adapter
RJ45 Network Cable
1.3MP Network Camera with
Video Alert Notification
(Model No: VSPV13M)
Quick Setup
with iPhone / iPad
For operation manuals, please download from:
www.rhinoco.com.au/product/VSPV13M