Water HP-Soft-2 Installation Manual - Specifications

Specifications 

Warning:

Do not use this system on water that is microbiologically unsafe or of unknown  

quality without adequate disinfection before or after the system. ! 

Feed water: 

Minimum inlet pressure: 20 psig 

Maximum outlet pressure: 125 psig 

Minimum water temperature: 34 degrees F 

Maximum water temperature: 110 degrees F

Power 

Voltage: 120VAC 

Frequency: 60Hz 

Power consumption: 7 Watts Maximum 

Installation  

Location: Indoors (Protect from direct sunlight) 

Minimum ambient temperature: 34 degrees F 

Maximum ambient temperature: 122 degrees F 

Salt Capacity 

7000-1.0, 7000-1.25, 7000-1.5, 7000-2.0 

340 lbs (154 Kg) 

7000-2.33, 

7000-3.0 

      600 

lbs 

(272 

Kg) 

This unit conforms to ANSI/NSF-44 for specific performance claims as verified and 

substantiated by test data.  Refer to NSF Compliance Data Insert for further 

information.  Please contact Water, Inc. for additional copies.