WaterFurnace IntelliZone2 Installation Manual - Intellizone2
19
INTELLIZONE2
● 24V INSTALLATION MANUAL
IntelliZone2
● 24V Confi guration cont.
UV Lamp - Cumulative Run Time default is NONE
hours (OFF) and Calendar Time is NONE. Values
can range from NONE, 400-3600 hours for
Cumulative Run Time (in 100 hour increments), or
Calendar Time can be set to NONE to 48 months
(in 3 month increments).
Air Cleaner - Cumulative Run Time default is 0 hours
(NONE) and Calendar Time is NONE. Values can
range from NONE, 400-2500 hours for Cumulative
Run Time (in 100 hour increments), or Calendar
Time can be set to NONE to 12 months (in 3 month
increments
Dealer Information - Allows the input of the dealer name,
phone, address, e-mail and website. Simply press the
screen segment where you want to enter information and a
keypad will appear.
Fault Status - Shows the last 10 IntelliZone2
● 24V system
Faults (heat pump fault history is displayed at the heat
pump). The faults can be cleared or refreshed from this
screen.
Restore Defaults - This will allow you to revert to the
factory default settings.
Restart Thermostat/Upgrade Software - This allows a
convenient way to restart the thermostat or upload the
latest software using the USB port without killing power to
the whole system.
USB - Allows the import and export of data using the USB port.
Importation of: Installer settings, User Settings, Program,
Dealer Details
Exportation of:Installer settings, User Settings, Program,
Dealer Details
Data Logging - Allows the USB thumb drive to record the data
from the zoning system every 5 seconds. Do not collect data
for more than 5 days otherwise file will be too large to open.
F°/C° - Allows selection of either Fahrenheit or Celsius
temperature scale
Residential/Commercial - Future Use.
Photo Upload - The MasterStat will allow personal photo
upload to be displayed once the thermostat goes into
sleep mode. The MasterStat can only accept photos that
are TCI format. Common photo formats can be converted
to the TCI format, which is used by the thermostat, by
using our photo converter software. Once the photos
have been converted and uploaded to the MasterStat they
will be displayed as a slide show when the thermostat
goes into sleep mode. Sleep mode occurs after 5 minutes
of inactivity (no screen touches). The photo conversion
software and instructions for uploading the photos can be
found at www.auroracontrols.com
AWL Status - Not applicable.