Waterproof Moto-series Installation Manual - page 2
1. Introduction
The Moto series provides everything you require to setup a complete audio system. It is specially
designed to provide the maximum outdoor music entertaining experience to the users. It offers high
quality music experiences and 4 different user-friendly means of installation. The audio system can
be installed on a variety of mobile vehicles, including motorcycles, ATV, UTV, most of the watercrafts
and scooters.
CONTENTS
1. Introduction ………………………………………………...……………………………………………….1
2. Applications …………………………………………………………………………………………………1
3. Safety Precaution …………………………………………………………………………………………..1
4. Specification ………………………...……………………………………………………………………...2
5. Parts list ……………………………………………………………………………………………………..3
6. Select the best location for mounting …………………………………………………………………….3
7. Amplifier Installation……….. ……………………………...………………………………………………4
8. Loudspeaker Installation Manual …………………………………………………………………………5
9. Amplifier functional test ……………………………………………………………………………………5
2. Applications
Moto series are built to withstand tough challenges in different outdoor / marine environments. They
can be installed at locations with high humidity and high chance of water splashes. Vehicles suitable
for installation include:
Motorcycle
All terrain vehicle (ATV)
Personal watercraft (PWC)
Snowmobile
Utility task vehicle (UTV)
Golf car
Recreational vehicle (RV)
Boats / yachts
1
6
3. Safety Precaution
Read the manual before installation. It contains important information for all users.
Turn off the main electricity supply before beginning the installation.
For electric drill, ensure it is connected to the ground properly and the area is free of any liquid.
If any problem occurs during the installation, please contact your local dealer for advice before
proceeding. Contract professionals if necessary.
The amplifier has auto on/off system to help saving power and has a self protective thermal fuse
device to protect both amplifier and loudspeakers from short circuiting. It is compatible with audio
devices that have an AUX-IN 3.5mm jack and the system is highly adapted to condition changes in
the environment, including humidity and temperature. Complete with waterproof accessories, the
amplifier and loudspeakers carry IP 68 rating and IP 65 rating respectively.
Item
Qty Description
A
1
Amplifier
B
1
Amplifier bracket
C
1
Volume control
D
1
Volume control clamp
E
2
Jet-engine speakers
F
2
Brackets (surface mount)
G
2
Clamps (handle bar mount), 7/8”
H
2
Clamps (handle bar mount), 1”
I
2
Speaker holders
J
2
Stainless steel brackets
K
2
Pan head, Phillips, type C, 4x15 mm
L
2
Pan head, Phillips, type C, 4x25 mm
M
4
Speaker nuts, 4x7mm
N
6
Pan head, Phillips, type A, 4x12 mm
O
2
Truss head, Phillips, type C, M4x8 mm
P
2
Hex nuts 4.85x3.8 mm
Q
2
Lock washers 6.3x10 mm
R
2
Lock washers 5.8x10 mm
S
4
Flat washers 6.3x10 mm
T
2
Square head bolts, 4.85x10 mm
U
2
Hex point, type A, 6.3x19 mm
V
2
Truss head, Phillips, type B, 4x13 mm,
spare for plastic mount.
W
1
EPDM gasket, 50Lx15Wx1.5H mm
X
1
EPDM gasket, 82Lx15Wx1.5H mm
Y
1
Volume control, Pan head, Phillips,
type C, 4x25 mm
Z
2
Washer 4 x 9.5 x 0.8 mm
Moto-620 / 625 / 630
Moto-820 / 825 / 830
Item
Qty Description
A
1
Amplifier
B
1
Amplifier bracket
C
1
Volume control
D
1
Volume control clamp
E
4
Jet-engine speakers
F
4
Brackets (surface mount)
G
4
Clamps
(handle bar mount), 7/8”
H
4
Clamps
(handle bar mount), 1”
I
4
Speaker holders
J
4
Stainless steel brackets
K
4
Pan head, Phillips, type C, 4x15 mm
L
4
Pan head, Phillips, type C, 4x25 mm
M
8
Speaker nuts, 4x7mm
N
12
Pan head, Phillips, type A, 4x12 mm
O
4
Truss head, Phillips, type C, M4x8 mm
P
2
Hex nuts 4.85x3.8 mm
Q
2
Lock washers 6.3x10 mm
R
2
Lock washers 5.8x10 mm
S
4
Flat washers 6.3x10 mm
T
2
Square head bolts, 4.85x10 mm
U
2
Hex point, type A, 6.3x19 mm
V
2
Truss head, Phillips, type B, 4x13 mm,
spare for plastic mount.
W
1
EPDM gasket, 50Lx15Wx1.5H mm
X
1
EPDM gasket, 82Lx15Wx1.5H mm
Y
1
Volume control, Pan head, Phillips,
type C, 4x25 mm
Z
4
Washer 4 x 9.5 x 0.8 mm
The amplifier would be turned off automatically in the following situations:
1) While the music is still playing and the volume is adjusted to the minimal for more than 40
seconds, the amplifier should turn off spontaneously.
2) If the music stops playing while the audio device is still connected to the amplifier, the amplifier
would also turn off automatically after 40 seconds.
3) Disconnecting the audio device from the amplifier would turn off the amplifier after 40 seconds.