Waterproof Moto-series Installation Manual - page 4
5. Parts List
Please check the parts and their quantity before installing your audio system. Contact your local
dealer if anything is missing as soon as possible. For the list of all parts, please see page 6
Figure 2. Parts of Moto-820 / 825 / 830. Contents of all the parts included in the 4 Channel Systems
Figure 1. Parts of Moto-620 / 625 / 630. Contents of all the parts included in the 2 Channel Systems
4
3
6. Select the best location for mounting
Be aware that Moto series can adapt different mounting styles and each follows a separate set of
installation instructions. The high fidelity loudspeakers are designed to stand on top of a strong
surface. All speakers are intended to be installed into a sturdy panel.
The surface/panel you select should have the appropriate strength to hold the unit firmly in place
after installation. Apart from the strength, consider the effects of shock, vibration, shear pressure and
movement in different directions have on the mounting surface/panel. If the surface is not sturdy
enough, the housing may be dislocated from its original position and it may be damaged. If you are
uncertain about the location of your choice, contact the local dealer for advice.
7. Amplifier Installation
Read the following installation manual carefully before proceeding. If you are unfamiliar with wiring
electronic devices, consult your local dealer or contract professionals. False wiring could damage the
amplifier and the rest of audio system.
Figure 4. Wiring diagram of Moto-620 / Moto- 625 / Moto-630.
1. Red wire - Audio amplifier power (+). Connect the red wire directly
to the positive (+) terminal of the battery.
2. Black wire - Audio amplifier ground (-). Connect black wire to the
negative (-) terminal of the battery.
3. Grey wire - Connect the grey wire to the positive (+) terminal of the
right speaker.
4. Grey/White wire - Connect the grey/white wire to the negative (-)
terminal of the right speaker.
5. White wire - Connect the white wire to the positive (+) terminal of
the left speaker.
6. White/Black wire - Connect the white/black wire to the negative (-)
terminal of the left speaker.
7. Black wire - Connect amplifier and volume control through a black
3.5 mini plug waterproof wire and then you will need to connect an
audio cord(not supplied) from the volume control to an iPod/MP3/CD
player/Phone/ Satellite Radio System.
Figure 3. Amplifier and volume control installation quick guide.
Select a stable and sturdy surface before beginning the process. Mount the amplifier unit as illustrated in the diagram (left).
For reference to volume control installation, please see right. Ensure the right parts are used during installation. For the parts
list, please see Parts List on page 3 and 4. Test the audio system by playing music from your audio device. If the green light
comes on then rotate the volume control knob to adjust the volume. Contact your local dealer if the system fails to function.
Figure 5. Wiring diagram of Moto-820 / Moto-
825 / Moto-830.
1. Red wire - Audio amplifier power (+).
Connect the red wire directly to the positive (+)
terminal of the battery.
2. Black wire - Audio amplifier ground (-).
Connect black wire to the negative (-) terminal
of the battery.
3. Grey wire - Connect the grey wire to the
positive (+) terminal of the right front speaker.
4. Grey/White wire - Connect the grey/white
wire to the negative (-) terminal of the right front
speaker.
5. White wire - Connect the white wire to the
positive (+) terminal of the left front speaker.
6. White/Black wire - Connect the white/black
wire to the negative (-) terminal of the left front
speaker.
7. Purple wire - Connect the purple wire to the
positive (+) terminal of the right rear speaker.
8. Purple/white wire - Connect the purple/white
wire to the negative (-) terminal of the right rear
speaker.
9. Green wire - Connect the green wire to the positive (+) terminal
of the left rear speaker.
10.Green/white wire - Connect the green/white wire to the negative
(-) terminal of the left rear speaker.
11. Black wire - Connect amplifier and volume control through a
black 3.5 mini plug waterproof wire and then you will need to
connect an audio cord(not supplied) from the volume control to an
iPod/MP3/CD player/Phone/ Satellite Radio System.