WATT AGE Super Impress II EP ARF Instructions For Final Assembly - page 6
6
SECTION 3: KIT CONTENTS
AIRFRAME ASSEMBLIES
❑ (1) Fuselage w/Battery Hatch Cover
❑ (1) Right Wing Panel w/Aileron
❑ (1) Left Wing Panel w/Aileron
❑ (1) Horizontal Stabilizer w/Elevator
❑ (1) Vertical Stabilizer w/Rudder
❑ (1) 16-5/8" Threaded Pushrod Wire w/Z-Bend
❑ (1) 16-3/8" Threaded Pushrod Wire w/Z-Bend
❑ (2) Nylon Control Horns w/Nylon Backplates
❑ (2) Nylon Clevises
❑ (4) M2 x 12mm Machine Screws
❑ (6) C/A Style Hinges
ELEVATOR AND RUDDER CONTROL SYSTEMS
❑ (1) Prebent Aluminum Landing Gear Bracket
❑ (1) Prebent Tail Wheel Wire w/Tail Wheel
❑ (2) Molded Plastic Wheel Pants
❑ (2) Main Gear Wheels
❑ (2) M2.5 x 25mm Machine Screws
❑ (6) M2.5 Hex Nuts
❑ (4) M2.5 Flat Washers
❑ (2) M3 x 10mm Flange-Head Wood Screws
LANDING GEAR ASSEMBLY
❑ (2) 1-7/8" Threaded Pushrod Wires w/Z-Bends
❑ (2) Nylon Adjustable Control Horns
❑ (2) Nylon Clevises
❑ (1) Plywood Aileron Servo Tray
❑ (6) C/A Style Hinges
AILERON CONTROL SYSTEM
❑ (1) Plywood Motor Mount Box (Long - Direct Drive)
❑ (1) Plywood Motor Mount Box (Short - Gear Drive)
❑ (2) Balsa Triangle Stock
❑ (2) M3 x 8mm Flange-Head Machine Screws
❑ (3) M2 x 12mm Flange-Head Wood Screws
MOTOR MOUNT ASSEMBLIES
❑ (1) Composite-Reinforced Wing Joiner
❑ (1) Plastic Wing-Screw Doubler
❑ (2) M3 x 20mm Flange-Head Self-Tapping Screws
MISCELLANEOUS WING PARTS
❑ (1) Molded Plastic Cowling
❑ (1) Molded Windshield and Side Windows Set
❑ (8) M2 x 8mm Wood Screws
❑ (1) Double-Sided Foam Tape
❑ (1) Decal Set
MISCELLANEOUS FUSELAGE PARTS
We have organized the parts as they come out of the box for easier identification during assembly. Before you begin assembly,
group the parts as we list them below. This will ensure that you have all of the parts before you begin assembly and it will also help
you become familiar with each part.
If you find any parts missing or damaged, please contact us as soon as possible,
using the Customer Service Information on page # 3.
We stock a complete line of replacement parts for your Wattage Super Impress II EP ARF. Listed below are the replacement parts that
are available along with their respective part numbers for easy ordering convenience. We suggest ordering directly from your
local dealer.
If your dealer does not stock Wattage or Global products, you can order replacement parts
directly from us, using the Customer Service Information on page # 3.
SECTION 4: REPLACEMENT PARTS
Instruction Manual ......................................................... 144994
Wing Set ........................................................................ 144995
Stabilizer Set .................................................................. 144996
Fuselage Set .................................................................. 144997
Molded Cowling ............................................................. 144998
Molded Wheel Pants ...................................................... 144999
Landing Gear Bracket .................................................... 145000
Tail Wheel Assembly ...................................................... 145001
Hardware Set ................................................................. 145002
Windshield and Side Windows Set ................................ 145003
Motor Mount Set (Gear Drive and Direct Drive) ............ 145004
Decal Set ....................................................................... 145005
To convert inches into millimeters: Inches x 25.4 = mm
To convert millimeters into inches: Millimeters / 25.4 = in