Watts Premier Filter Pure UF3 Installation, Operation And Maintenance Manual - Faucet Installation
6
Faucet Installation
Insert the faucet shank through the hole in sink
and let it rest on the sink top.
Place the escutcheon chrome plate and the
black rubber washer on the faucet shank.
(Parts found in faucet parts bag).
From the underside of the sink, slide on the
locating washer, lock washer and brass
nut onto the shank. Check orientation of
faucet then tighten brass nut securely.
Step 7
Step 5
Step 6
Escutcheon Plate
Rubber Washer
Locating Washer
Lock Washer
Brass Nut
Tube Insert
Ferrule (Sleeve)
Compression Nut
Locate the 1/4” blue tube in the Filter-Pure Box. The tube has one
straight end and one bent end. From the faucet parts bag, assemble on
the straight end, place the brass nut on the tube first, then the sleeve
(small tapered end of sleeve must point to the end of tube) and then
insert the plastic insert all the way into the end of the tube. (See Picture)
Blue Tube Connection
Step 8
Step 9
Step 10
Attach the bent, open end of the blue tube into the right side of the
system by pushing it into the quick connect fitting (behind Purple UF
Membrane filter head).
Insert the assembled blue tube into the end of the faucet shank until it
stops.
Slide brass nut and plastic sleeve down until you can thread nut
onto the faucet shank. Use a wrench to securely tighten the brass nut.