Wave Broadband Home Network Gateway User Manual - Tv Setup

54

TV Setup

If you have connected the Home Network Gateway Client to your TV with an HDMI™ cable, 

your TV Setup should automatically select the correct resolution.

If you are using alternate cables, including an HDMI to DVI cable, you should select the highest 

video resolution supported by your TV. The Gateway Client automatically adjusts the video 

output to match the broadcast format and the selections set in the TV Setup card. The video 

resolution options are 480i (non-HDTV), 480p, 720p (default), 1080i, and 1080p. 

If your TV is standard-definition (SD), make sure 480i is the only box checked. All other 

video resolutions will be output at 480i. You can still watch HD channels and they may look 

considerably better than their SD counterparts.

Sound Effects

Allows you to set the volume level of the Home Network Gateway sound effects, including 

turning them off completely.

Front Panel

Allows you to set the brightness level of the Gateway Client’s front panel display.