Wave Luxury M-1313 User Manual

User’s Guide

IMPORTANT: 

Read this manual before proceeding with installation of the bathtub and keep it 

with the other accompanying documents.

This manual is valid for the installation of tubs both with and without whirlpool.

Massage bathtub

 Page  1 of 1

1

1

9.5Temperature adjustment

9.5.1When the thermostatic heating function is on, press the Function

 setting button “                ”till “℃" on LCD blinks, then press “             ”

and“              ” to adjust the temperature. During the adjusting, 

LCD displays the setting temperature, then the temperature shall be

 increased /decreased 1 ℃after press“               ”and “       ”once；

stop adjusting for 5 seconds，LCD shall display the current water 

temperature.

9.6 If the temperature sensor occurs error, LCD displays “E1” and the

 controller sounds “di…di…”, in this case the heater cannot be start.

10.Ozone

When the pump is working, press“              ”to turn on or turn off 

the ozone. The ozone will be turned off automatically in 10 minutes.

11Drainage function after power off

Ensure that the main power supply is not cut-off. After turning off the

 control panel, the drainage valve will be automatically turned on and

 shut-off after 30 minutes.

(optional function)

SIZE:1700X1700X720mm

MODEL:M- 1313